Managing Settings - MICRO-EPSILON colorSENSOR CFO Operating Instructions Manual

Operation
All output values and additional information to be transmitted, which were acquired at a certain point in time,
are combined to a measured value frame, described in the Interface
5.6.8.4
All settings on the controller, e.g. controller settings, colors, Ethernet settings, can be permanently stored in
user programs, so-called parameter sets.
colorSENSOR CFO

Managing Settings

Go to the menu Settings > System settings > Manage settings.
Instructions, see A
During programming, all settings are saved in the controller
regularly (every 30 s at the latest) so that they are available
again the next time the controller is switched on.
i
However, it is recommended to save the data in an exter-
nal parameter set to be able to reconstruct them in case
of a system failure.
To do this, select Manage settings > Export set-
tings > Export.
Fig. 63 Manage settings
3.
Page 119