Ethernet (Eth) - MICRO-EPSILON colorSENSOR CFO Operating Instructions Manual

Installation and Assembly
Use: Direct for 3 individual colors or binary for 6 color groups
The switching state zero is not used to ensure reliable test performance in the face of a discontinuity.
The switching state all switched is recommended as the standard error output.
i
4.3.2
For establishing data transfer to an RJ45 Ethernet socket on a PC, for displaying the web interface or to a
PLC for transmitting measured values via REST API, described in the Interface
- 4-pin socket
- with Ethernet network (PC)
Pin
1
2
3
4
Fig. 13 ETH Ethernet socket
The controller can be configured using the HTTP-API
1) Conductor color CAB-M12-4P-St-ge ... RJ45-Eth
colorSENSOR CFO
Use a shielded cable with a length of < 30 m.
Micro-Epsilon recommends the optionally available CAB-M12-8P-Bu-ge

Ethernet (ETH)

Connect the controller to the network using a shielded Ethernet cable (Cat5E) with a length of < 100
m. Micro-Epsilon recommends the optionally available cable CAB-M12-4P-St-ge ... RJ45-Eth with the
PS2020 power supply unit, see A 1.
Color Function Description
1
Orange/ TX+ Ethernet
white
Blue/ RX+ Ethernet
white
Orange TX- Ethernet
Blue RX- Ethernet
2
View of con-
troller flange
Pin sequence, 4-pin
socket
commands, see A
2) Specification according to 100BASE-TX
cable, see A 1.
Instructions, see A 3.
2
3
1 4
cable connector,
view of solder side
3.
Page 30