Configuration Via Ethernet; Requirements - MICRO-EPSILON colorSENSOR CFO Operating Instructions Manual

Operation
5.4
The CFO controller allows creation of dynamic web sites containing the current settings for the controller and
peripheral devices. Operation is only possible while there is an Ethernet connection to the controller.
5.4.1
Current web browser (for example Mozilla Firefox version 54, Google Chrome version 60 or Microsoft Edge
version 14) on a PC with a network connection. The controller is factory-set to direct connection to facilitate
initial operation of the controller. If you have configured your browser so that it accesses the Internet via a
proxy server, please add the IP address of the controller (169.254.168.150) in the browser settings to the list
of addresses which should not be routed via the proxy server. The MAC address of the measuring device is
given on the controller rating plate.
Using the sensorTOOL program, you can search for connected CFO series controllers on your PC via the
available interfaces and establish a connection.
The sensorTOOL program is available online at
https://www.micro-epsilon.com/download/software/sensorTOOL.exe
colorSENSOR CFO

Configuration via Ethernet

Requirements

Start the sensorTOOL program.
Set the Sensor group Color in the drop-down menus and the corresponding CFO type in Sensor
type.
Page 66