Operation Using Membrane Keypad - MICRO-EPSILON colorSENSOR CFO Operating Instructions Manual

Operation
5.3.2
Various keypad actions are shown below. LED states:
- Continuously illuminated or off.
- Flashing with various rhythms.
For operation, a keypad is depicted at the left showing the current status of all indicators as well as any key
actuations. Key actuations are differentiated between
- short (pressing for less than two seconds) and
- long (holding down for two seconds or longer).
All descriptions start in the operating mode. If no learned color is currently recognized, the following repre-
sentation typically applies.
The following instructions do not describe any specific procedure; they are simply a compilation of typical
key actuations in the operating
of all
colorSENSOR CFO

Operation Using Membrane Keypad

The sensor is in the operating mode.
In the delivery state all outputs are set to high when no color is detected. For
this reason the first three switching output LEDs light up with the CFO100; with
the CFO200 all switching output LEDs light up.
mode, see Fig. 23
actions, see 5.2 or, see 5.3.2
and in the menu mode, see Fig. 24. Detailed descriptions
Page 43