MICRO-EPSILON colorSENSOR CFO Operating Instructions Manual page 69

Operation
Network
Controller with dynamic IP address, PC with DHCP
For this purpose, use the CAB-M12-4P-St-ge;Xm-PUR-Cat5e;RJ45-Eth
Your DHCP server assigns an IP address to your controller. You can request this IP address from your IT
department.
Alternative: When using DHCP with the DHCP server coupled to the DNS server, access to the controller is
possible using a host name with the structure "CFO-<Serial number>".
Interactive web pages for controller and peripherals settings now appear in the web browser.
colorSENSOR CFO
Connect the controller to a switch using a direct Ethernet connection (LAN).
Enter the controller in the DHCP / register the controller with your IT department.
Start the sensorTOOL
program, see
Click the button. Now select the desired controller from the list.
Click on the Start Browser button to connect the controller to your standard browser.
Start a web browser on your PC. To reach a CFO100 with the serial number "7454229522", enter
"CFO-7454229522" in the web browser address line.
5.4.1.
cable, see A 1.
Page 69