Current Detection Profile - MICRO-EPSILON colorSENSOR CFO Operating Instructions Manual

Operation
5.6.3.2
Under this menu item you can set the name, color space and settings for an incorrect color (color not recog-
nized).
Current
detection profile
Fields with gray
background re-
quire a selection.
Fields with dark
Val-
border require
ue
entry of a value.
colorSENSOR CFO

Current Detection Profile

Go to Settings > Detection profile > Current detection profile.
Name
Color space
Output configuration
Hold time
Click the Apply button to apply all settings.
#0 up to #10
XYZ, xyY, L*a*b*, L*u*v*, L*u'v'
Binary coded
for CFO100 OUT0...OUT2,
for CFO200 OUT0...OUT7
0 [ms]; time in milliseconds
Name defines name of recognition profile. The name may be
a maximum of 64 characters long and contain only alphanu-
meric characters (a-z, A-Z, 0-9, no umlauts), spaces and the
special characters +-#,.().
Color space defines the color space to be used for detec-
tion. Changing the color space refreshes the website.
The Output configuration: Color not recognized defines
the outputs to be switched for the state "Color not recog-
nized" (blue ist set to high).
Hold time: Color not recognized defines for how long the
output configuration is held. The hold time must not be nega-
tive.
i
If possible, the hold time should not be longer than a
few seconds, otherwise changes in state will no longer
be perceived.
Fig. 38 Current detection profile
Explanation see below
Explanation see below
Explanation see below
Explanation see below
Page 87