Tolerance Mode - MICRO-EPSILON colorSENSOR CFO Operating Instructions Manual

Operation
5.3.7.4
Changing the tolerance mode is useful if your application requires specific color
colorSENSOR CFO
INT
TEACH
AUTO
The LED flashes rapidly (1900/100 ms) to signal that the multi-teach mode is
activated.
CLR
OPT
GATE 1
TEACH 2
HOLD 3
ESC
MULTI 4
TOL
CLASSIFY 5
SPHERE 6
7
CYLINDER
BOX 8

Tolerance Mode

INT
TEACH
AUTO
CLR
OPT
GATE 1
TEACH 2
HOLD 3
ESC
MULTI 4
TOL
CLASSIFY 5
SPHERE 6
7
CYLINDER
BOX 8
Press the TEACH key for less than 2 sec. to switch over to the multiple teach
mode.
Press the key for less than 2 sec. to switch to the next option group.
tolerances, see 2.4.
Page 63