MICRO-EPSILON colorSENSOR CFO Operating Instructions Manual page 116

Operation
Assign a static IP address or activate DHCP .
When DHCP is activated, the controller is accessible in the network under its DHCP Host name. The DHCP
host name must be at least one and at most 63 characters long and may only contain alphanumeric charac-
ters (a-z, A-Z, 0-9, no umlauts) and the special character -.
With DHCP it may be necessary to enable the controller MAC address in the network.
Ethernet set-
tings IPv4
Fields with gray
background re-
quire a selection.
Fields with dark
Val-
border require
ue
entry of a value.
colorSENSOR CFO
Go to the Apply button to apply the settings you have made.
Method Static
Dynamic
(DHCP)
MAC address
Go to the menu Settings > System settings > Ethernet settings IPv4.
IP address Value
Subnet mask Value
Gateway Value
DHCP Value
Host name
Value
When using a static IP ad-
dress it is necessary to enter
the values for the IP address,
Gateway and Subnet mask;
this is not required when
DHCP is used.
When DHCP is activated, the
controller is accessible in the
network under its DHCP Host
name.
With DHCP it may be neces-
sary to enable the controller
MAC address in the network.
Page 116