Tolerance Mode - MICRO-EPSILON colorSENSOR CFO Series Instruction Manual

Operation
5.4.5.4
It is practical to change the tolerance mode, when your application requires specific color tolerances, see
Chap. 5.4.5.5.
colorSENSOR CFO
INT
TEACH
AUTO
The LED flashes rapidly (1900/100 ms) to signal that the multiple teach mode is
activated.
CLR
OPT
GATE 1
TEACH 2
HOLD 3
ESC
MULTI 4
TOL
CLASSIFY 5
SPHERE 6
7
CYLINDER
BOX 8

Tolerance Mode

TEACH INT
AUTO
CLR OPT
GATE 1
TEACH 2
HOLD 3
ESC
MULTI 4
TOL
5
CLASSIFY
SPHERE 6
CYLINDER 7
BOX 8
Press the TEACH key for less than 2 sec. to switch over to the multiple
teach mode.
Press the key for less than 2 sec. to change to the next option group.
Page 53