Ethernet (Eth) - MICRO-EPSILON colorSENSOR CFO Series Instruction Manual

Assembly
The three switching outputs are switchable push-pull outputs. The switching output logic level depends on the
operating voltage +UB connected.
Use: Direct for 3 individual colors or binary for 7 color groups
The switching state zero is not used to ensure reliable test performance in the face of a discontinuity.
The switching state all switched is recommended as the standard error output.
i
4.4.2
For data transmission connection to an RJ45 Ethernet connector
- 4-pin Female connector
- with Ethernet network (PC)
Pin
1
2
3
4
Fig. 8 ETH Ethernet socket
The sensor can be configured using the HTTP-API commands, see Chap.
1) Conductor color CAB-M12-4P-St-ge ... RJ45-Eth
2) Specification pursuant to 100BASE-TX
colorSENSOR CFO
Use shielded cable with a length < 30 m.
Micro-Epsilon recommends use of CAB-M12-8P-Bu-ge cable, available as an option, see Chap.

Ethernet (ETH)

Connect the sensor to the network using a shielded Ethernet cable (Cat5E) with a length < 100 m. Micro-
Epsilon recommends use of the optionally available cable CAB-M12-4P-St-ge ... RJ45-Eth, see Chap.
Color Function Description
1
Orange/ TX+ Ethernet
white
Blue/ RX+ Ethernet
white
Orange TX- Ethernet
Blue RX- Ethernet
2
View of sensor
flange socket
Pin sequence, 4-pin
2
3
1 4
Cable connector,
view of solder side
A 3.
A 1.
A 1.
Page 21