Ricoh IM C300 Service Manual page 1572

Bit Switches – 5
Bit 5 Bit 4
0 0
0 1
1 0
1 1
6-7 Not used
IP Fax Switch 09 (SP No. 1-111-010)
No. Function
0 Network I/F setting for SIP
connection
0: IPv4
1: IPv6.
1 Network I/F setting for Fax
communication
0: Same setting as SIP server
connection
1: Automatic setting
2 Record-route setting
0: Disable
1: Enable
3-4 re-INVITE transmission delay
timer setting
Bit 4 Bit 3
0 0
0 1
1 0
1 1
5 SIP-IPFAX: Adding vender
information selection
0: Declare
T38VendorInfo=RICOH
1: Not declare
T38VendorInfo=RICOH
6-7 Not used.
IP Fax Switch 0A - Not used (do not change the settings)
IP Fax Switch 0B - Not used (do not change the settings)
SM
data transmission and T.38 phase decision. If your destination return is
late on the network or G3 fax return is late, adjust the longer interval
75s
timer.
120s
The default is "00" (75 seconds).
180s
240s
Do not change these settings.
Comments
Selects the connection type (IPV4 or IPV6) to connect to the
SIP server.
0: The I/F setting for fax communication follows the setting
for SIP server connection.
1: The negotiation between the SIP server and the device
decides whether IPv4 or IPv6 is used for the I/F setting for
fax communication.
0: Disables the record-route function of the SIP server.
1: Enables the record-route function of the SIP server.
This changes the interval for transmit re-INVITE after
receiving the ACK message transmitted by T.38 device.
No delay
1 sec
2 sec
3 sec
0: Use this setting normally.
1: This setting is used only when a customer wants to
connect the machine with SIP server + VOIP-GW provided
by AVAYA Inc.
Do not change these settings.
97 D0CK