Sp3-Xxx - Ricoh IM C300 Service Manual

2-021-003 Comp3:5-95
2-021-004 Comp4:5-95
2-021-005 Comp5:5-95
2024 [Compression ratio of ClearLightPDF]
Selects the compression ratio for clearlight PDF for the two settings that can be
selected at the operation panel.
2-024-001 Compression Ratio(Normal)
2-024-002 Compression Ratio(High)
2025 [Compression ratio of ClearLightPDF JPEG2000]
Selects the compression ratio for clearlight PDF for the two settings that can be
selected at the operation panel.
2-025-001 Compression Ratio(Normal) JPEG2000
2-025-002 Compression Ratio(High) JPEG2000
2030 [OCR PDF DetectSens]
2-030-001 White Lumi Value: 0 - 255
2-030-002 White Pix Ratio: 0 - 100
2-030-003 White Tile Ratio: 0 -100
2031 [Vertical Judgment Setting]
001 Function Setting: 0 - 1
When the image does not become upright state due to the vertical judgment error, set this
SP to "0: Disable". After changing the setting, turn OFF/ON the main power.
002 Algorithm Setting: 0 - 2
Set the identification algorithm when SP2-031-001 is "1: Enable". Change the setting
when the vertical judgment error occur frequently. After changing the setting, turn OFF/ON
the main power.

3.12.3 SP3-XXX

3044 -
3-044-001 - CTL*
SM Appendices
*CTL [5 to 95 / 65 / 1 /step ]
*CTL [5 to 95 / 80 / 1 /step ]
*CTL [5 to 95 / 95 / 1 /step ]
*CTL
*CTL
*CTL
*CTL
*CTL [0 to 255 / 250 / 1 / step]
*CTL [0 to 100 / 80 / 1 / step]
*CTL [0 to 100 / 80 / 1 / step]
*CTL [0 to 1/ 0 / 1 / step]
0:Enable
1:Disable
*CTL [0 to 2 / 0 / 1 / step]
0: Normal Algorithm
1: Simple Algorithm
2: Composite Algorithm
[0 to1 / 1 / 1 / -]
3-437
Scanner Service Mode
[5 to 95 / 25 / 1 /step ]
[5 to 95 / 15 / 1 /step ]
[5 to 95 / 25 / 1 /step ]
[5 to 95 / 15 / 1 /step ]
D0CA/D0C9/D0C8/D0CB