Ricoh IM C300 Service Manual page 1485

2. Insert the SD card (Fax Connection Unit Type M41) in SD slot 1 (upper) with its label face towards
the front of the machine if SD slot 1 is vacant. If slot 1 is not vacant, follow "Moving a Fax
Communication application into an SD card in SD slot 1" described below.
3. Plug in, and then turn ON the main power.
4.
Press [Firmware Version] in the [Machine/Control Panel Information].
"Settings" icon > [System Settings] > [Machine/Control Panel Information]
5.
Check whether the aics version is displayed.
Moving a Fax Communication application into an SD card in SD slot 1
1.
Insert the SD card (Fax Connection Unit Type M41) SD slot 2 (lower) with its label face towards the
front of the machine. Then push it slowly into SD slot 2 (lower) until you hear a click.
2.
Plug in, and then turn ON the main power.
3. Move the Fax Connection Unit application from the SD card in SD slot 2 (lower) to the SD card in
SD slot 1 (upper) with SP5-873-001.
4.
Turn OFF the main power.
5. Remove the SD card from SD slot 2 (lower), and then keep it in a safe place (see "SD Card Appli
Move" in the field service manual for the mainframe).
6.
Attach the SD card slot cover, and then turn on the machine (
7.
Turn ON the main power.
8.
Press [Firmware Version] in the [Machine/Control Panel Information].
"Settings" icon > [System Settings] > [Machine/Control Panel Information]
9.
Check whether the aics version is displayed.
D0CK 10
Fax Unit Options
x 1).
SM