Bit Switches – 3
0-
Extension access code
7
(0 to 7) to turn V.8
protocol On/Off
0: On
1: Off
Communication Switch 1C (SP No. 1-104-029)
No Function
0-
Extension access code
1
(8 and 9) to turn V.8
protocol On/Off
0: On
1: Off
2-
Not used
7
Communication Switch 1D - Not used (do not change the settings)
Communication Switch 1E - Not used (do not change the settings)
Communication Switch 1F - Not used (do not change the settings)
SM
If the PABX does not support V.8/V.34 protocol procedure, set this bit
to "1" to disable V.8.
Example: If "0" is the PSTN access code, set bit 0 to 1. When the
machine detects "0" as the first dialed number, it automatically
disables V.8 protocol. (Alternatively, if "3" is the PSTN access code,
set bit 3 to 1.)
Comments
Refer to communication switch 1B.
Example: If "8" is the PSTN access code, set bit 0 to 1. When the
machine detects "8" as the first dialed number, it automatically
disables V.8 protocol. (If "9" is the PSTN access code, use bit 1.)
Do not change the settings.
83
D0CK