Ricoh IM C300 Service Manual page 1535

System Switch 13 - Not used (do not change these settings)
System Switch 14 - Not used (do not change these settings)
System Switch 15 (SP No. 1-101-022)
No Function
0 Not used
1 Going into the Energy Saver mode
automatically
0: Enabled
1: Disabled
2- Not used
3
4- Interval for preventing the machine
5 from entering Energy Saver mode if
there is a pending transmission file.
Bit 5 Bit 4
0 0
0 1
1 0
1 1
6- Not used
7
System Switch 16 (SP No. 1-101-023)
No Function
0 Parallel
Broadcasting
0: Disabled
1: Enabled
1- Not used
7
System Switch 17 - Not used (do not change these settings)
System Switch 18 - Not used (do not change these settings)
D0CK
Comments
Do not change the settings.
1: The machine will restart from the Energy Saver mode
quickly, because the +5V power supply is active even in
the Energy Saver mode. The LED of the operation switch
is flashing instead of entering Energy Saver mode.
Use this setting if an external telephone has to be used
when the machine is in the Energy Saver mode.
Do not change these settings.
If there is a file waiting for transmission, the machine
does not go to Energy Saver mode during the selected
period.
After transmitting the file, if there is no file waiting for
Setting
transmission, the machine goes to the Energy Saver
1 min
mode.
30 min
1 hour
24 hours
Do not change the settings.
Comments
1: The machine sends messages simultaneously using all available ports
during broadcasting.
NOTE: If a customer wants to keep a line available for fax reception or
other reasons, select "0" (Disable).
Do not change these settings.
60
Bit Switches – 1
SM