2.
Press [System Settings] on the Settings screen.
3.
Press [Machine] [Others] [Register/Change/Delete Remote Machine].
4.
Press [*Not Registered], and then press [Register/Change].
When a machine is registered already as the main machine, you cannot select other items that are
displayed as [*Not Registered].
5.
Enter the IP address or hostname of the main machine in [IP Address/Host Name] and press
[Connection Test].
6.
Press [OK].
7.
Press [Home] after specifying the settings.
Configuring the Remote Reception Settings
Do the following procedure to enable the Client-side Machine(s) to receive faxes via the Remote
Machine. You can forward or route received documents per line or special sender.
•
By performing procedures described above (Installing the application in the Remote Machine
and Client-side Machine, Registering the Client-side Machine(s), Registering the Remote
Machine), the Client-side Machines can send faxes via the Remote Machine. The procedures
shown below are necessary to enable the Client-side Machines to receive faxes.
D0CK
12
Fax Unit Options
SM