Ricoh IM C300 Service Manual page 1534

Bit Switches – 1
0E: Spain
0F: Israel
10: ---
11: USA
System Switch 10 (SP No. 1-101-017)
No Function
0-7 Threshold memory level for parallel memory transmission
System Switch 11 (SP No. 1-101-018)
No Function
0 TTI printing position
0: Superimposed on the page
data
1: Printed before the data
leading edge
1- Not used
2
3 TTI used for broadcasting
0: The TTIs selected for each
Quick/Speed dial are used
1: The same TTI is used for all
destinations
4- Not used
7
System Switch 12 (SP No. 1-101-019)
No Function
0- TTI printing
7 position in the
main scan
direction
SM
22: Hungary
23: Czech
24: Poland
Comments
TTI: 08 to 92 (BCD) mm
Input even numbers only.
This setting determines the print start position for the TTI from the left edge
of the paper. If the TTI is moved too far to the right, it may overwrite the file
number which is on the top right of the page. On an A4 page, if the TTI is
moved over by more than 50 mm, it may overwrite the page number.
Comments
Change this bit to 1 if the TTI overprints information that the
customer considers to be important (G3 transmissions).
NOTE: If "1" is selected, it is possible that sent data is
printed on two sheets of paper.
Do not change these settings.
1: The TTI (TTI_1 or TTI_2) which is selected for all
destinations during broadcasting.
Do not change these settings.
59
Comments
Threshold = N x 128 KB + 256 KB
N can be between 00 - FF(H)
Default setting: 02(H) = 512 KB
D0CK