Ricoh IM C300 Service Manual page 1568

Bit Switches – 5
0: No confirmation, 1:
Confirmation
IP Fax Switch 01 (SP No. 1-111-002)
No. Function
0-3 IP Fax delay level setting
Selects the acceptable delay level.
Level 0 is the highest quality
Default is "0000" (level 0).
Bit 3
0
0
0
0
4-7 IP Fax preamble wait time setting Selects the preamble wait time.
IP Fax Switch 02 (SP No. 1-111-003)
No. Function
0 IP Fax bit signal reverse setting
0: Maker code setting
1: Internal bit switch setting
1 IP Fax transmission speed
setting
0: Modem speed
1: No limitation
2 SIP transport setting
0: TCP
1: UDP
SM
the telephone number from the sender matches the registered
telephone number in this machine. If this confirmation fails, the line is
disconnected.
Bit 2 Bit 1
0 0
0 0
0 1
0 1
Comments
When "0" is selected, the bit signal reverse method is
decided by the maker code.
When "1" is selected, the bit signal reverse method is
decided by the internal bit switch.
When communicating between IP Fax devices, LSB first is
selected.)
Selects the transmit speed for IP Fax communication.
This bit switch sets the transport that has priority for
receiving IP Fax data.
This function is activated only when the sender has both
TCP and UDP.
Comments
Bit 0
0
1
0
1
[00 to 0f]
There are 16 values in this 4-bit binary switch combination.
Waiting time: set value level x 100 ms
Max: 0f (1500 ms) Min: 00 (No wait time)
The default is "0000" (00H).
93
Level 0
Level 1
Level 2
Level 3
D0CK