Ricoh IM C300 Service Manual page 1554

Bit Switches – 3
1: Enable (Active)
1 Remote mode switch
(FAX mode)
0: Disable
1: Enable (Active)
2 Remote mode switch
(AUTO mode)
0: Disable
1: Enable (Active)
3- Not used
7
Communication Switch 05 (SP No. 1-104-006)
No Function
0- Remote mode switch
3 number
00-09 (0-9:HEX)
4- Not used
7
Communication Switch 06 - Not used (do not change the settings)
Communication Switch 07 - Not used (do not change the settings)
Communication Switch 08 - Not used (do not change the settings)
Communication Switch 09 (SP No. 1-104-009)
No Function
0- Minimum interval between
7 automatic dialing attempts
Communication Switch 0A (SP No. 1-104-011)
No Function
0 Point of resumption of memory
transmission upon redialing
0: From the error page
1: From page 1
1- Not used
7
SM
Set this bit to ON when you wish to turn on the remote mode switch
after automatic reception with FAX mode.
Set this bit to ON when you wish to turn on the remote mode switch
after automatic reception with AUTO mode.
Do not change the settings.
Comments
Enter the number to switch between TEL/FAX modes using the
external phone.
Do not change the settings.
Comments
This value is the minimum time that the machine waits
before it dials the next destination.
Comments
0: The transmission begins from the page where
transmission failed the previous time.
1: Transmission begins from the first page, using
normal memory transmission.
Do not change these settings.
79 D0CK