Ricoh IM C300 Service Manual page 1522

IP-Fax Troubleshooting
7 Enable H.323 SW is set to on?
8 Local fax IP address registered?
9 Local fax Alias number registered?
10 Network bandwidth too narrow?
11 Remote fax cancelled transmission?
12 Local fax registered in Gatekeeper/SIP
server ?
SM
Request the sender to check the settings.
User Parameter SW 34 BIT 0 and 1
•
Only if the remote sender fax is a Ricoh
fax.
Register the IP address.
Register the Alias number.
Request the system administrator to increase the
bandwidth.
Lower the start modem reception baud rate on the
receiving side.
IPFAX SW06
Check whether the remote fax cancelled the
transmission.
Contact the network administrator.
•
The sender machine displays this error
code when the sender fax is a Ricoh
model.
47 D0CK