Ricoh IM C300 Service Manual page 1548

Bit Switches – 2
Printer Switch 07 (SP No. 1-103-008)
No Function
0 Not used.
1 Selects the 95% reduced
printing function for letter
size.
2- Not used.
3
4 Receiver name printed on
the transmission result
report
5- Not used.
7
Printer Switch 08 - Not used (do not change the settings)
Printer Switch 09 - Not used (do not change the settings)
Printer Switch 0A - Not used (do not change the settings)
Printer Switch 0B - Not used (do not change the settings)
Printer Switch 0C - Not used (do not change the settings)
Printer Switch 0E (SP No. 1-103-015)
No Function
0* Paper size selection priority
0: Width
1: Length
1* Paper size selected for
printing A4 width fax data
0: 8.5" x 11" size
1: A4 size
2 Page separation
0: Enabled
1: Disabled
3- Printing the sample image on
SM
Comments
Do not change the settings.
0:OFF Not reduced printing
1:ON Only when printing letter size, performs 95% reduced printing
of the entire image (in both of main and sub directions) Report
printing and printing from the bypass tray are excluded.
Do not change the settings.
Selects the printing target on the transmission result report.
0: All receivers
1: Printing only receivers which have received fax transmission.
Do not change the settings.
Comments
0: A paper size that has the same width as the received data is
selected first.
1: A paper size which has enough length to print all the
received lines without reduction is selected first.
This switch determines which paper size is selected for
printing A4 width fax data, when the machine has both A4 and
8.5" x 11" size paper.
1: If all paper sizes in the machine require page separation to
print a received fax message, the machine does not print the
message (Substitute Reception is used).
After a larger size of paper is set in a cassette, the machine
automatically prints the fax message.
"Same size" means the sample image is printed at 100%,
73 D0CK