Ricoh IM C300 Service Manual page 1505

Code
14- User Not Found on SMTP Server
06 (551)
14- Data Send to SMTP Server Failed
07 (4XX)
14- Data Send to SMTP Server Failed
08 (5XX)
14- Authorization Failed for Sending to
09 SMTP Server
14- Addresses Exceeded
10
14-11 Buffer Full
14- Data Size Too Large
12
14- Send Cancelled
13
14- Security Locked File Error
14
14- Mail Data Error
15
D0CK
Meaning Suggested Cause/Action
of space remaining on the target HDD.
•
The designated user does not exist.
•
The designated user does not exist on the
SMTP server.
•
The designated address is not for use with
direct SMTP sending.
•
Failed to access the SMTP server because the
transmission failed.
•
PC not operating correctly.
•
SMTP server operating incorrectly
•
Network not operating correctly.
•
Destination folder setting incorrect.
•
Direct SMTP sending not operating correctly.
•
Failed to access the SMTP server because the
transmission failed.
•
SMTP server operating incorrectly
•
Destination folder setting incorrect.
•
Direct SMTP sending not operating correctly.
•
Software application error.
•
POP-Before-SMTP or SMTP authorization
failed.
•
Incorrect setting for file transfer
•
Number of broadcast addresses exceeded the
limit for the SMTP server.
•
The send buffer is full so the transmission could
not be completed. Buffer is full due to using
Scan-to-Email while the buffer is being used to
send mail at the same time.
•
Transmission was cancelled because the
detected size of the file was too large.
•
Processing is interrupted because the user
pressed Stop.
•
Update the software because of the defective
software.
•
The transmitting e-mail is interrupted via DCS
due to the incorrect data.
•
Update the software because of the defective
software.
30
Error Codes
SM