Code
15-
Mail Header Format Error
14
15-
Mail Divide Error
15
15-
Mail Size Receive Error
16
15-
Receive Timeout
17
15-
Incomplete Mail Received
18
15-
Final Destination for Transfer Request
31
Reception Format Error
15-
Send/Delivery Destination Error
39
15-
SMTP Receive Error
41
15-
Off Ramp Gateway Error
42
15-
Address Format Error
43
15-
Addresses Over
44
15-
Attachment File Format Error
61
15-
TIFF File Compatibility Error
62
D0CK
Meaning
Suggested Cause/Action
•
The mail header is not standard format. For
example, the Date line description is incorrect.
•
The e-mail is not in standard format. There is
no boundary between parts of the e-mail,
including the header.
•
The mail cannot be received because it is too
large.
•
May occur during manual receiving only
because the network is not operating correctly.
•
Only one portion of the mail was received.
•
The format of the final destination for the
transfer request was incorrect.
The transmission cannot be delivered to the final
destination:
•
Destination file format is incorrect.
•
Could not create the destination for the file
transmission.
•
Reception rejected because the transaction
exceeded the limit for the "Auth. E-mail RX"
setting.
•
The delivery destination address was specified
with Off Ramp Gateway OFF.
•
Format error in the address of the Off Ramp
Gateway.
•
The number of addresses for the Off Ramp
Gateway exceeded the limit of 30.
•
The attached file is not TIFF format.
Could not receive transmission due to:
•
Resolution error
•
Image of resolution greater than 200 dpi without
extended memory.
•
Resolution is not supported.
•
Page size error
•
The page size was larger than A3.
•
Compression error
•
File was compressed with other than MH, MR,
34
Error Codes
SM