Ricoh IM C300 Service Manual page 1451

No. Part Name
*1
fan (FAN5) Exit Exhaust Fan:
Low Speed
- - PP:Charge DC:Y
- - PP:Charge DC:M
- - PP:Charge DC:C
- - PP:Charge DC:Bk
- - PP:Development:
Y
- - PP:Development:
M
- - PP:Development:
C
- - PP:Development:
Bk
- - PP: Image
Transfer: YMC
- - PP: Image
Transfer: Bk
- - PP: Paper
Transfer: +
- - PP: Paper
Transfer: -
- - PP:Charge AC:Y
- - PP:Charge AC:M
- - PP:Charge AC:C
- - PP:Charge AC:Bk
*1 IM C400SRF only
SM Appendices
SP Name SP No.
5-804-121
5-804-044 Do not turn ON these SPs with the
5-804-045
5-804-046
5-804-047
5-804-048
5-804-049
5-804-050
5-804-051
5-804-053 Do not turn ON these SPs with the
5-804-056
5-804-057 •
5-804-058
5-804-059 Do not use these SPs, otherwise
5-804-061
5-804-063
5-804-065
3-459
Input and Output Check
Remark
PCDU installed.
If you turn ON with the PCDU installed,
an electric current continues to flow in a
particular place of the drum. Therefore
the drum may be damaged
electrostatically.
Note:
If you turn ON these SPs multiple at the
same time, and turn OFF one of the
SPs, all of the output will be stopped.
When you want to stop the outputs, turn
OFF all of the SPs turned ON.
PCDU installed.
If you turn ON with the PCDU installed,
an electric current continues to flow in a
particular place of the drum. Therefore
the drum may be damaged
electrostatically.
Do not turn on with the ITB unit
installed.
If the transfer is turned on without
turning the transfer belt, a high
voltage is continuously applied at
the same position, which may
cause a problem such as damage
to the belt.
•
Do not apply "PP: Paper Transfer:
-" and "PP: Paper Transfer: +" at
the same time.
SC312 will occur.
D0CA/D0C9/D0C8/D0CB