Ricoh IM C300 Service Manual page 1536

Bit Switches – 1
System Switch 19 (SP No. 1-101-026)
No Function
0- Not used
5
6 Extended scanner
page memory after
memory option is
installed
0: Disabled
1: Enabled
7* Special Original mode
0: Disabled
1: Enabled
* This setting can be used for the client machine which has no FCU.
System Switch 1A (SP No. 1-101-027)
No Function
0 LS RX memory capacity
to threshold setting
7 00-FF (0-1020 Kbyte:
Hex)
System Switch 1B - Not used (do not change these settings)
System Switch 1C - Not used (do not change these settings)
System Switch 1D (SP No. 1-101-030)
No Function
0 RTI/CSI/CPS code
display
0: Enable
1: Disable
1- Not used
7
SM
Comments
Do not change the settings.
0: After installing the memory expansion option, the scanner page
memory is extended to 4 MB from 2 MB.
1: If this bit is set to 1 after installing the memory expansion option,
the scanner page memory is extended to 12 MB. But the SAF
memory decreases to 18 MB.
1: If the customer frequently wishes to transmit a form or letterhead
which has a colored or printed background, change this bit to "1".
"Original 1" and "Original 2" can be selected in addition to the "Text",
"Text/Photo" and "Photo" modes.
Comments
Sets the value to x4KB. When the amount of available memory drops
below this setting, RX documents are printed to conserve memory.
Initial setting 0x80 (512 KB)
NOTE: If a customer wants available memory size to be larger,
decrease this threshold
Comments
0: RTI, CSI, CPS codes are displayed on the top line of the LCD panel
during communication.
1: Codes are switched off (no display)
Do not change these settings.
61 D0CK