Ricoh IM C300 Service Manual page 1543

Table of Contents

When sending Tiff files to the mail/folder destinations, selects the resizing function in the main

scan direction.

Controls ON/OFF of the function, that fit the Tiff files sent from the fax application, within the

standard size.

0: Disabled (not resizing)

1: Enabled (resizing)

Not Used (do not change these settings)

I-fax Switch 06 - Not used (do not change the settings)

I-fax Switch 07 - Not used (do not change the settings)

I-fax Switch 08 (SP No. 1-102-009)

0-7 Memory Threshold for POP Mail Reception

This setting determines the amount of SAF (Store and Forward) memory. (SAF stores fax

messages to send later for transmission to more than one location, and also holds incoming

messages if they cannot be printed.) When the amount of SAF memory available falls below

this setting, mail can no longer be received; received mail is then stored on the mail server.

00-FF (0 to 1024 KB: HEX)

The hexadecimal number you enter is multiplied by 4 KB to determine the amount of memory.

I-fax Switch 09 (SP No. 1-102-010)

I-fax Switch 0A - Not used (do not change the settings)

I-fax Switch 0B - Not used (do not change the settings)

I-fax Switch 0C - Not used (do not change the settings)

I-fax Switch 0D (SP No. 1-102-014)

Do not change the settings

This setting determines the number of retries when connection and

transmission fails due to errors.

01-F (1-15 Hex)

Bit Switches – 2

Do not change the

Chapters

Table of Contents