Signals and Pinouts
A.1
Connector signals
A.1.1
Header connectors
A-2
This appendix describes the connectors on the Interface Tile and lists the signals on each
pin.
Figure A-1 shows the header connectors on the top of the Interface Tile. Corresponding
connectors are mounted on the bottom of the Interface Tile.
Note
All signals from the lower headers are routed straight through to the upper headers. (The
path of some clock signals, however, can be broken and alternative clocks used, see
Clock signals on page A-20).
Signals not listed in the tables are not connected to the prototyping area or peripheral
connectors. Even signals are on one connector row and odd signals are on the other row.
See the schematic for more details on header signals.
Copyright © 2004-2007. ARM Limited. All rights reserved.
Figure A-1 Header connector voltages
ARM DUI 0188C