16 Safety
Safety Features
Global Motion Sensors (Optional)
This OPTIONAL safety system is used to detect objects located behind the truck. This system is
turned on by placing the transmission in reverse.
Warning!
The operator must read the installation manual of the system manufacturer before using
the system.
The main components of this system are a control box placed in the cab, a set of sensors fixed on the
rear bumper, and a solenoid valve mounted on the chassis.
When the system is turned on, a green light on the cab control box should light up to indicate that the
system is operating. When an object is detected, a yellow light comes on and an audible alarm is
heard. The vehicle brakes are automatically applied. The brakes can be disabled by pressing the A
B
O
switch on the control box. This will cause a red warning light to turn on indicating the
RAKE
FF
brakes will not automatically engage. The yellow light and audible alarm will still operate in this mode
as a safety precaution.
UTO