Lifting Arm; Daily Inspection - Labrie AUTOMIZER FULL EJECT Maintenance Manual

Lifting Arm

To keep the arm in good working order and to reduce
the amount of down time and the risk of accidents, a
preventive maintenance program must be
implemented and followed thoroughly.
Maintenance personnel must be familiar with the
operation of the arm, the safety around it and the
maintenance procedures described in this chapter.

Daily Inspection

Danger!
Always lock out and tag out the vehicle
when inspecting or performing
maintenance on it (see Locking Out and
Tagging Out the Vehicle on page 26)
On a daily basis, perform a visual inspection of the arm,
looking for leaks, cracks or premature wear of the
moving parts. For detailed information on greasing
points, see Lubrication on page 87.
To perform the daily inspection:
1.
Start the engine and engage the hydraulic pump
(pump switch
2. Fully extend the arm.
Danger!
Do not stand directly in the path of the
arm while performing the inspection.
3.
Turn OFF the hydraulic pump and the engine.
4.
Perform a visual inspection of the following items:
).
ON