Body Hinges; Greasing Body-Chassis Hinges; Tailgate; Greasing Tailgate Hinges, Locking Mechanism And Cylinder Pins - Labrie AUTOMIZER FULL EJECT Maintenance Manual

Hide thumbs Also See for AUTOMIZER FULL EJECT:
Table of Contents

Advertisement

96 Lubrication

Body Hinges

Greasing Body-Chassis Hinges

The body-chassis hinges should be lubricated weekly. Also, check for cracks or corrosion. Any crack
must be reported, and repaired by qualified personnel. If necessary, contact LabriePlus for technical
support.
Danger!
Do not operate this equipment if there are any signs of damage or incomplete repairs.
Figure 4-15
Body hinge

Tailgate

Greasing Tailgate Hinges, Locking Mechanism and Cylinder Pins

It is important to lubricate the tailgate hinges, locking mechanism and the cylinder pins every week
with multipurpose grease (see Recommended Lubricants on page 87).
Caution!
Excessive wear might compromise the proper working condition of the tailgate.
Also, inspect the welds around hinges. The proper working condition of the following components is
also to be checked:
 Tailgate hydraulic cylinders
Grease fitting

Advertisement

Table of Contents
loading

Table of Contents