Schematics; Warranty Registration Form; Introducing The Automizer ™ Full Eject - Labrie AUTOMIZER FULL EJECT Maintenance Manual

2 Introduction

Schematics

For schematics related to body parts, refer to the A
For electrical schematics, refer to the schematics provided with your A
As for pneumatic and hydraulic schematics for your A
available from LabriePlus Service Department.
N : A number of system schematics are included in this manual.
OTE

Warranty Registration Form

Do not forget to complete the owner registration form and to send it to Labrie Enviroquip Group.
Make sure to fill out the in-service date. This date will be used as the start date of the warranty period.
If the in-service date is not indicated, the warranty period will start 30 days after the delivery date.
Introducing the A
The A
UTOMIZER
standards, and designed to collect residential and commercial refuse and recycling materials. It is the
ideal choice for those who need reliability and quick route times built into one solid package. Thanks
to its fully automated design and its large hopper area, the A
overhead down allowing for more time spent picking up and less time dumping.
The A
UTOMIZER
components. Everything has been foreseen to achieve excellent reliability while keeping construction
simple yet robust.
The A
UTOMIZER
the R -H
IGHT AND
1000 pounds fully extended. The R
hydraulic joystick control, and the Zero-Grab low swing-out makes it easy to collect refuse in narrow
spaces.
A ™ F
UTOMIZER
telescopic cylinder is connected.
Once the body of the A
management landfill or other appropriate site (e.g. transfer station, incinerator, recycling station).
The A
UTOMIZER
acting hydraulic telescopic cylinder to horizontally eject the refuse load out of the rear opening.
The standard packer cycle time is 13.5 to 16.5 seconds at 1500 rpm, and the "Auto-Eject Mode" cycle
takes 40 seconds at 1500 rpm.
The hopper may also be equipped with a full-size crusher panel (optional). It also features a hinged
door on the left-hand side and 1 or 2 hinged doors on the right-hand side (2 doors if an automated
arm is installed).
UTOMIZER
™ F E is a straight-frame, side-loading vehicle, manufactured to the highest
ULL JECT
™ F E has been developed based on years of experience and a wise choice of
ULL JECT
™ F E features a strong, light-weight body with a reliable loading arm called
ULL JECT
™ arm. This arm can reach positions of up to 12 feet from the hopper and lift up to
-H
IGHT
E units are also equipped with a full eject packer panel to which a 3-stage
ULL JECT
™ F
UTOMIZER ULL
™ F E is not a tip-to-dump type of refuse truck. Instead, it uses a double-
ULL JECT
™ F
UTOMIZER ULL
™ F
UTOMIZER
™ F E
ULL
UTOMIZER
™ arm is easy to operate with an electric over
AND
E is full, all its content is unloaded at a waste
JECT
E Parts Manual;
JECT
™ F E
UTOMIZER ULL JECT
E unit, copies are
ULL JECT
JECT
™ F E helps to keep
ULL JECT
unit;