Patient Monitor User Manual
System Menu
Figure 4-13 Alarm Setup
- ALARM VOL: set the alarm volume by turning the knob. The valid range is from 1 to 10.
- ALM REC TIME: set to 8s, 16s or 32s.
You can also set alarm parameters in MAITAIN > USER MAINTAIN > ALARM SETUP.
Refer to Chapter6 Alarm for details.
4.11 Key Volume
Select SELECTION item in SYSTEM SETUP menu to call up SELECTION sub-menu as
shown below. Select KEY VOL item and set the volume. The selections are OFF, LOW, MED,
HIGH.
Figure 4-14 Selection
4.12 Drug Calculation
The monitor provides drug calculation and titration table display functions for fifteen different
drugs. For details, please refer to the Chapter10 Drug Calculation and Titration Table.
- 31 -