Table of Contents
Advertisement
Patient Monitor User Manual
4.13 Waveform Demonstration
Select DEMO item in SYSTEM MENU to call up INPUT DEMO KEY. After entering the
password, the system enters the Demonstration Waveform status.
The purpose of waveform demonstration is only to demonstrate the machine performance and for
training purposes. In clinical applications, this function is not recommended because the DEMO
will mislead the hospital personnel to treat the waveform and parameter as actual data of the
patient, which may result in delay of treatment or mistreatment.
4.14 Maintenance
Select MAINTAIN item in SYSTEM MENU to open the ENTER MAINTAIN PASSWORD
dialog box as shown below, in which you can enter password and then customize maintenance
settings. Factory maintenance function is only available for the service engineers of the
manufacturer or representatives authorized by the manufacturer.
User Maintain
Input the password A B C into the ENTER MAINTAIN PASSWORD box and press
CONFIRM, then the USER MAINTAIN menu will pop up, in which you can set up the
following items.
LANGUAGE: You can set the language to be displayed on the interface.
NOTE:
Please restart the monitor after changing the language.
LEAD NAMING: You can select AHA or IEC. To know the difference between these two
styles, refer to Chapter12 ECG/RESP Monitoring.
Figure 4-15 Enter Maintain Password
- 32 -
System Menu
Advertisement
Table of Contents
