Table of Contents
Advertisement
Patient Monitor User Manual
Chapter 16 IBP Monitoring (Optional)
16.1 Introduction
The monitor measures direct blood pressure (SYS, DIA and MAP) of one selected blood vessel
through two channels, and displays two waveforms of measured direct blood pressure (SYS, DIA
and MAP).
The available pressure labels are:
16.2 Precautions during IBP Monitoring
1
The operator should avoid contact with the conductive parts of the appurtenance
when it is connected or applied.
2
When the monitor is used with HF surgical equipment, the transducer and the cables
must be avoided from conductive connection to the HF equipment. This is to protect
against burns to the patient.
3
Disposable IBP transducer or domes should not be reused.
NOTE:
Use only the pressure transducer listed in the Chapter 18 Accessories and Ordering
Information.
The specified transducer is designed to have the special ability to protect against the electricity
shock (especially for the leak current allowed), and it is protected against the effects of a
discharge of a cardiac defibrillator. It can be used in the surgical operation. When the patient is in
Label
ART
PA
CVP
RAP
LAP
ICP
P1-P2
Alternative non-specific pressure labels
WARNING
Definition
Arterial Blood Pressure
Pulmonary Artery Pressure
Center Venous Pressure
Right Atrial Pressure
Left Atrial Pressure
Intracranial Pressure
- 123 -
IBP Monitoring (Optional)
Advertisement
Table of Contents
