Record Setup - EDAN iM8 Series User Manual

Patient Monitor User Manual

4.6 Record Setup

Select RECORD in SYSTEM SETUP menu to call up the following menu:
In the sub-menu, the user may select the REC WAVE1, REC WAVE2 or REC WAVE3, a
maximum of 3 waveforms can be printed out.
The output waveforms can be selected for the following items:
ECG1 waveform, ECG2 waveform and ECG3 waveform.
ECG1,
(There will be 7 ECG waveforms on the screen in Full-Lead display mode). If no
ECG2,
ECG waveform is currently displayed on the screen, this item cannot be picked.
ECG3
SpO
2
(If no SpO
SpO
2
picked. In ECG Full-Lead display mode, this item can be picked, although no
SpO
2
RESP waveform.
(If no RESP waveform is currently displayed on the screen, this item cannot be
RESP
picked. But in ECG Full-Lead display mode, this item can be picked, although no
RESP waveform is currently displayed on the screen.)
IBP1 waveform and IBP2 waveform.
(If no IBP waveform is currently displayed on the screen, this item cannot be
IBP1,
picked. But in ECG Full-Lead display mode, this item can be picked, although no
IBP2
IBP waveform is currently displayed on the screen.)
Figure 4-11 Record
Plethysmogram.
waveform is currently displayed on the screen, this item cannot be
2
waveform is currently displayed on the screen. )
- 28 -
System Menu