Table of Contents
Advertisement
Patient Monitor User Manual
Trend and Event
Figure 9-5 ALARM RECALL Menu
NOTE:
When the user set the NIBP SETUP > PR (NIBP) to ON, the PR parameter will display in
the menu of ALARM RECALL; if the user set it to OFF, the PR parameter will not display.
To view all waveforms during the alarming process
Pick L-RIGHT and turn the knob to view all 8/16/32-second waveforms stored.
To view other alarm events
Events of up to 60 are listed chronologically from the latest to the earliest. Pick UP-DOWN
button and turn the knob to view later or earlier events.
Recording
Pick REC to print out all data and waveforms of this event.
- 67 -
Advertisement
Table of Contents
