Mark Event - EDAN iM8 Series User Manual

Patient Monitor User Manual System Menu
Figure 4-5 Default Menu
In this sub-menu, you can select the factory default or the user-defined default. Also in this
sub-menu, you can save the current configuration as the user-defined default configuration. At
this time, the system will automatically save all the setups in the parameter menu, ECG lead, gain
and filter way as the user-defined default configuration according to the patient type. The dialog
box as shown below will pop up.
Figure 4-6 Confirm Save Default Configuration
Click on YES to save the current patient type configuration as the user default configuration.
Click on NO to give up the operation.

4.3 Mark Event

There are four types of event that you can define.
Select MARK EVENT item in SYSTEM SETUP to call up the following menu:
- 25 -