Patient Monitor User Manual
System Menu
Figure 4-12 Trace Setup
You can define the traces displayed on the screen in this menu. The waveforms available for
selection are those whose modules have been selected in MODULE SETUP menu.
4.9 Monitor Version
Pick VERSION to show the software version information of this monitor.
4.10 Alarm Volume
The system provides five levels of alarm volume and an alarm silence function. The system will
give audio alarm prompt (except alarm sound) based on the selection.
The user may select different levels of volume as per clinical requirement. The method is listed
below:
Press ALARM SETUP item in SYSTEM SETUP menu to call up ALARM SETUP sub-menu
as shown below, in which the user may set up the alarm volume and other alarm information.
- 30 -