Table of Contents
Advertisement
JetMove 203-230
1
Table
Contents
of
1.1
The digital servo amplifier JetMove 203-230 fulfils the accepted safety regulations
and standards. Special emphasis was given to the safety of the users.
The following additional regulations apply to the user:
•
•
•
1.1.1
Usage as agreed upon includes operation in accordance with these operating
instructions.
The digital servo amplifier JetMove 203-230 may only be operated in the closed
control cabinet and within the range of the set values, see chapter 5 "Technical
Data", page 35.
Do not apply a voltage to the digital servo amplifier JetMove 203-230 that is
higher than the prescribed operating voltage.
The operating voltage of the digital servo amplifier JetMove 203-230 ranges between
AC 195 V and AC 265 V. Thus, the digital servo amplifier comes under the EC Low
Voltage Directive.
It is the explicitpurpose of the servo controller JetMove 203-230 to torque-,
speed- and/or position-control, and to drive brushless synchronous servo
motors. The winding isolation of the motors must be higher than, or at least
equal to, the DC link voltage supplied by the servo amplifier.
The digital servo amplifier JetMove 203-230 is used to control machinery, such as
conveyors, production machines, and handling machines.
1.1.2
The digital servo amplifier must not be used in technical systems which to a
high degree have to be fail-safe, e.g. ropeways and aeroplanes.
If the digital servo amplifier JetMove 203-230 is to be run under operating conditions,
which differ from the conditions mentioned in chapter 3 "Operating Conditions", page
27, the manufacturer is to be contacted beforehand.
Jetter AG
Safety Instructions
General Information
relevant accident prevention regulations;
accepted safety rules;
EC guidelines and other country-specific regulations.
Usage as agreed upon
Usage other than agreed upon
1.1 General Information
9
Advertisement
Table of Contents
