Safety Instructions; General Safety Instructions; Intended Conditions Of Use; Usage Other Than Intended - Jetter JM-206-230 User Manual

JetMove 206B-230
1
Table Contents of
1.1
The digital servo amplifier JetMove 206B-230 fulfills the accepted safety regulations
and standards. Special emphasis was given to the safety of the users.
Further, the user should adhere to the following regulations:
•
•
•
1.1.1
Usage according to the intended conditions of use includes operation in accordance
with these operating instructions.
The digital servo amplifier JetMove 206B-230 may only be operated in the
closed control cabinet and within the range of the set values, seechapter 5
"Technical Data", page 37.
Do not apply a voltage to the digital servo amplifier JetMove 206B-230 that is
higher than the prescribed operating voltage.
The single phase or each of the three phases of the digital servo amplifier JetMove
206B-230 has got an operating voltage ranging between AC 195 V and AC 265 V.
Thus, the digital servo amplifier comes under the EG Low Voltage Directive.
It is the explicit purpose of the digital servo amplifier JetMove 206B-230 to
torque-, speed- and position-control, and to drive brushless synchronous
servo motors. The winding insulation of the motors must be higher than, or at
least equal to, the DC link voltage supplied by the servo amplifier.
The digital servo amplifier JetMove 206B-230 is used to control machinery, such as
conveyors, production machines, and handling machines.
1.1.2
This digital servo amplifier must not be used in technical systems which to a
high degree have to be fail-safe, e.g. ropeways and aeroplanes.
The servo amplifier JetMove 206B-230 is not a safety-relevant device
according to the machinery directive 2006/42/EG. Therefore, using this servo
amplifier for safety-relevant applications as regards safety of persons is
neither adequate nor permitted.
If the digital servo amplifier JetMove 206B-230 is to be run under operating
conditions, which differ from the conditions mentioned in chapter 3 "Operating
Conditions", page 31, the manufacturer is to be contacted beforehand.
Jetter AG

Safety Instructions

General Safety Instructions

pertinent accident prevention regulations;
accepted safety rules;
EC guidelines and other country-specific regulations.

Intended Conditions of Use

Usage Other Than Intended

1.1 General Safety Instructions
11