Ensure Your Own Safety; Malfunctions; Information Signs And Labels - Jetter JetWeb JetMove 203-230 User Manual

Table of Contents

1 Safety Instructions

1.2

Warning

1.2.1

1.2.2

Ensure your Own Safety

Isolate the digital servo amplifier JetMove 203-230 from the mains, if

maintenance works have to be carried out. By doing so, you will prevent

accidents resulting from electric voltage and moving parts.

Please note chapter 1.3 "Residual Dangers", page 15.

Safety and protective devices, e.g. the barrier and cover of the terminal

box or the thermal motor circuit-breaker must not in any case be shunted

or by-passed.

Dismantled protective equipment, such as the fuses and the thermal motor

circuit-breakers, must be reattached prior to commissioning and checked

for proper functioning.

Before commissioning, the machine manufacturer must carry out a hazard

analysis of the respective machine and take adequate measures so that

inadvertent motions will not lead to personal injury and to material

damage.

In the case of malfunctions or other faults, please immediately

separate the digital servo amplifier JetMove 203-230 from the mains.

Please note chapter 1.3 "Residual Dangers", page 15.

Malfunctions or other damages are to be reported to an authorized person

immediately.

Secure the servo amplifier JetMove 203-230 against misuse or accidental

use.

Writings, information signs, and labels always have to be observed and

kept readable.

Damaged or unreadable information signs and labels are to be

exchanged.

JetWeb

Jetter AG

Table of Contents