Table of Contents
Advertisement
JetMove 203-230
2
2.1
•
•
•
•
Accessories
The accessories are not included in the scope of delivery!
•
•
•
•
•
•
•
•
•
Jetter AG
Installing the JetMove 203-230
Scope of Delivery
Digital servo amplifier JetMove 203-230
Mating connector, plugged on
Cable strap serving as strain relief and motor power cable shield
User manual
System bus cable of cable confection # 530 x.x m; length: 0.2 m through 5.0 m.
Please refer to chapter 7.6 "Jetter System Bus", page 60.
Motor power cable, see chapter 7.2 "Motor Connection", page 47.
Resolver cable; please refer to chapter 7.3 "Connection of the Resolver", page
52.
HIPERFACE cable; please refer to chapter 7.4 "HIPERFACE Connection", page
55.
Motors, e.g. synchronous servo motors of the motor series JK or JL, made by
Jetter AG.
Motor circuit-breaker, see chapter 5 "Technical Data", page 35.
Circuit-breaker, see chapter 5 "Technical Data", page 35.
Isolating transformer or autotransformer
Mounting screws, 2 pcs.; please refer to Fig. 4, page 23.
Note!
If you are not sure which mounting accessories you require, please contact Jetter
AG.
2.1 Scope of Delivery
21
Advertisement
Table of Contents
