Jetter JetWeb JetMove 203-230 User Manual page 50

7 Description of Connections
Cable specification of the motor power cable with
mating connector SC for JetMove 203-230
For connection without motor holding brake
The measurements of the motor mating connector have been specified in
millimeters.
50
Motor power cable of cable confection # 26.1
Field Wiring
Terminals of the
JetMove 203-230
2
4 x 0.75 mm
The wires are
equipped with
bootlace ferrules.
Mating Connector
Cable Strap
Motor Cable
Pin
X62.U2
X62.V2
X62.W2
X62.PE
Shielding
Shielded, highly
flexible 4-wire
cable with PE.
Connect both sides of the shield
with the greatest possible surface
area!
Metallized enclosure necessary!
Wire number
1 Phase 1
2 Phase 2
3 Phase 3
Yellow-green PE conductor
Mating
connector of the
motor (female,
solder side)
Signal Pin
1
5
2
JetWeb
Jetter AG