Table of Contents
Advertisement
JetMove 203-230
7.2
7.2.1
Jetter AG
Motor Connection
General remarks
Important!
Alternative measures to avoid malfunctions of the control system and the motor:
Operate the brake via a separately shielded brake line. The distance
between brake line and motor power cable should be greater than 20
cm. This is the preferred solution.
Always connect brake lines to a separate power supply unit DC 24 V if
brake and motor lines are run together in one bunch of cables, and are
not separately shielded.
Important!
Measures to avoid oscillation and blocking of the motor:
Avoid mixing-up of phase cables, resp. be sure to connect the phase
cables according to pin assignment.
7.2 Motor Connection
47
Advertisement
Table of Contents
