Functions Linked With Microscope; Application Conditions - Olympus DP2-SAL Instructions Manual

Standalone connection kit

Table of Contents

Functions linked with microscope

By connecting DP2-SAL with the control box for microscope or the microscope frame, you can use the linked functions

described below.

Linked function

Automatic scale change When the objective magnification is changed by changing the coded revolving nosepiece

Shutter switch

You can use the linked functions when the following control box or the microscope frame is combined.

· U-CBS

· U-CBM

· BX3-CBM

· BX3-CBH

· BX3M-CB

· BX3M-CBFM

· STM7-CB

· STM7-CBA

· MX63-F

· MX63L-F

} The camera can also be connected to the microscope without connecting the hand switch for exposure U-HSEXP.

In such a case, the shutter switch function is not available.

} The camera can also be connected to the microscope without connecting the revolving nosepiece with coded

functions. In such a case, the automatic scale change function is not available.

or the motorized revolving nosepiece, the scale size is changed automatically according to

the magnification changed.

} The objective magnification must be inputted in advance. For inputting procedures,

refer to "Setting the microscope (P.78)".

Attach the hand switch for exposure (U-HSEXP) to the microscope frame. You can acquire

images while observing with the microscope.

Explanation

DP2-SAL

Table of Contents