Table of Contents
Advertisement
7
Initial Settings
For proper operations, the language and the scale magnification must be set at first.
Set according to the window (Setup wizard) displayed when the power is turned ON at first.
} The Setup wizard is not displayed when the power is turned ON next time.
If settings are not made when the power is turned ON at first, you can also change settings in the [Menu] tab later.
a
1
Press the main switch a of the control box D2-CB to turn ON the
power. The Setup wizard appears on the display.
In the initial settings, do not connect the recording media
CAUTION
such as a USB memory, etc. to the control box D2-CB until
the restart (automatic) after settings is completed.
For initial settings when the control box (U-CBS, etc.) is
connected, refer to "8 Functions linked with microscope"
on P.89.
2
Set the language according to the wizard.
3
In a same say, set the scale magnification (magnification of camera
adapter or objective you are using). When settings are completed,
Control box D2-CB restarts.
} If the settings on the wizard are canceled in the middle, all settings
so far are canceled.
} For setting the language, refer to P.78 and for setting the scale
magnification, refer to P.78.
} The date/time setting window and the display resolution setting
window are not displayed automatically. For setting procedures, refer
to "Setting Date/Time (P.82)" and "Setting display resolution (P.83)".
} You can acquire images without setting date/time, but we
recommend you to set date/time in advance to save the file name
of the acquired image with the correct date/time.
} The display resolution can be set automatically, but it may not be
set automatically depending on the display you are using. It is
recommended to set the display resolution in advance.
DP2-SAL
77
Advertisement
Table of Contents
