Table of Contents
Advertisement
a
b
5
ROI White Balance
Adjusting the white balance before acquisition allows you to acquire
images in appropriate colors.
This product is equipped with the function to adjust the white
balance automatically. This function is enabled in the initial setting.
However, depending on light source types or specimens, the white
balance cannot be adjusted automatically.
In such a case, use ROI White Balance.
1
Select the [Controller] tab a .
2
Press the [White balance] button b .
3
Specify the white area in the live image.
Start dragging to show the red area.
When you finish dragging, the area is identified and the white
balance is enabled.
} If you fail in settings, the message "The white balance settings
failed." appears. Press the [OK] button to delete the message and
perform the white balance again.
} If the white area in the live image is not specified or the exposure
is not appropriate (too bright or too dark), you may fail in setting the
white balance.
} If you press the [White balance] button, the white balance mode is
changed to ROI. There are Auto White Balance and Manual White
Balance in addition to ROI White Balance. You can change the
white balance mode using the [Camera Control] tab in the [Menu]
tab. For details, refer to "Setting white balance (WB) mode (P.32)".
DP2-SAL
27
Advertisement
Table of Contents
