Table of Contents
Advertisement
a
b
18
c
e
d
4
Connecting the AC adapter
· Always use the AC adapter and the power cord provided
CAUTION
by Olympus. Use of any other AC adapter may cause a
malfunction. If the proper AC adapter and the power cord
are not used, the electric safety and the EMC (Electro-
Magnetic Compatibility) performance of the device cannot
be assured.
· If the connector of the power cord is connected incorrectly,
it may cause a failure of the product. Be sure to connect it
correctly.
· Make sure to connect the power cord and the grounding
terminal of the power outlet. If the device is not grounded,
our intended electric safety and EMC performance of the
device can not be assured.
The cords are vulnerable to bend or twist.
CAUTION
1
Pass the cable of the AC adapter through the cable holder a of the
control box D2-CB and close the cable holder a securely. Passing
the cable through the cable holder a will prevent the cable from
easily disconnecting from the control box.
2
Insert the output plug b of the AC adapter into the DC input connector
c of the control box D2-CB.
3
Insert the connector d of the power cord into the input connector
e of the AC adapter securely.
4
Connect the power cord plug to a wall power outlet.
} The AC adapter or the control box D2-CB generate heat after long
hours of use, but this is not malfunction.
Advertisement
Table of Contents
