Table of Contents
Advertisement
a
c
d
a
b
c
2
Outputting measurement results in CSV file
b
The measurement results can be outputted to files in CSV format.
1
Select the [ON] button a of [Save results].
2
Select the
3
Select the [Controller] tab c .
4
Press the [Snap] button d . The file in CSV format is saved with the
same file name to the same save destination of the image.
3
Displaying cross lines
The cross lines can be displayed in the center of the window.
1
Select the [Play] tab a .
2
Press the [Measure] button b . The window changes to the
[Measurement] window.
3
Select the [ON] button c of [Cross hair]. The cross lines are displayed
on the window.
} The color of the cross lines may not be displayed properly due to
the noise when the image is compressed. In this case, record them
in TIFF to display properly.
button b to close the [Measurement] window.
DP2-SAL
75
Advertisement
Table of Contents
