Table of Contents
Advertisement
d
e
a
c
3
The message shown on the left appears. Confirm the content and
press the [OK] button d .
CAUTION
4
If the recording media such as a USB memory, etc. are connected
to the control box D2-CB, the message shown on the left appears.
Disconnect the recording media and press the [OK] button e .
CAUTION
5
Setting display resolution
b
The resolution according to the display you are using can be set.
The resolutions which cannot be displayed on your display are not
shown in the list.
The display resolutions you can set are as follows.
1920 x 1200 WUXGA
1920 x 1080 Full HD
1680 x 1050 WSXGA+
1280 x 854
1280 x 768 WXGA
1024 x 600 WSXGA
1600 x 1200 UXGA
1280 x 1024 SXGA
1280 x 960 QVGA
1024 x 768 XGA
1
Select the [Menu] tab a and select the [Setting] tab b in the tab
displayed.
2
Press the
resolution in the list.
} If nothing appears on the display due to the inappropriate
resolution, turn OFF the main switch once. Then, connect the
keyboard to the control box D2-CB and while pressing the [Alt] +
[M] keys, press the main switch of the control box D2-CB. The live
display starts at resolution XGA (1024 x 768).
When settings are changed, the control box D2-CB
restarts automatically. It takes several minutes because
the control box restarts twice. Do not turn OFF the
main switch or unplug the AC adapter until the restart
completes.
When setting the time zone, disconnect the recording
media connected to the control box D2-CB such as a
USB memory, etc. until the restart (automatic) after settings
is completed.
button of [Monitor resolution] c to select the display
DP2-SAL
83
Advertisement
Table of Contents
